IEC 60745-2-4 AMD 2-1995 手持式电动工具的安全.第2部分:砂轮机的特殊要求.补充件2

上一篇: IEC 61771-1995 核电厂主控制室设计的鉴定和批准
下一篇: IEC 60269-2 AMD 1-1995 低压熔断器第2部分:指定人员使用的熔断器(主要是工业用熔断器)的补充要求修改1

【英文标准名称】:Water-cooledsecondaryconnectioncablesforresistancewelding;part2:dimensionsandrequirementsforsingle-conductorconnectioncables
【原文标准名称】:电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸及要求
【标准号】:ISO8205-2-1993
【标准状态】:作废
【国别】:国际
【发布日期】:1993-12
【实施或试行日期】:
【发布单位】:国际标准化组织(ISO)
【起草单位】:ISO/TC44
【标准类型】:()
【标准水平】:()
【中文主题词】:次级线;电缆;单芯电缆;焊接设备;尺寸;规范(验收);电阻焊接;连接线
【英文主题词】:dimensions;single-corecables;weldingequipment;secondaryline;resistancewelding;electriccables;specification(approval);connectionlines
【摘要】:
【中国标准分类号】:K13
【国际标准分类号】:25_160_30
【页数】:5P;A4
【正文语种】:英语


Product Code:SAE ARD50055
Title:Aircraft Electrical Systems
Issuing Committee:Ae-8a Wiring Systems Installation Committee
Scope: It is the purpose of this document to present design and maintenance information that will provide a basis for satisfactory and safe aircraft electrical system installations. This document is not intended to be a design handbook. However, the requirements for safety extend so thoroughly throughout electrical systems that few areas of such systems are untouched by this document. It is recognized that individual circumstances may alter the details of any design. It is therefore important that this document not be considered mandatory, but be used as a guide to good application of electrical installation design and maintenance. Methods, techniques, practices and component selection shall be as prescribed in the current maintenance manual, in instructions provided by the current manufacturer, or shall be as specifically approved by the FAA Representative. Aircraft electrical systems have rapidly increased in importance over a number of years until they now are used for many fuctions necessary to successful aircraft operation. An ever increasing number of these functions are critical to the safety of the aircraft and it occupants. The greatly increased power available in aircraft electrical systems is another factor in aircraft safety. These considerations make it essential that aircraft electrical design and maintenance practices be carefully considered from the standpoint of safety and reliability. This document is intended to provide recommendations for practices which will contribute towards this end.